Ford 2011-2018 Factory Radio Add A Subwoofer Amplifier Plug & Play Harness

Description

Ford 2011-2018 Factory Radio Add A Subwoofer Amplifier Plug & Play Harness
Want to add a subwoofer to your original stereo?
Don’t want or know how to cut into your wiring?
Take the wiring guess work out of the installation with this plug and play wire harness!  Installation is as easy as 1, 2, 3!
Remove your OEM factory radio
Unplug the OEM factory wiring and plug in this wire harness
Reinstall your OEM factory radio
What is it?
This wire harness provides a connection for one set of RCA cables to provide an audio signal to an external amplifier, as well as an add-a-circuit with remote wire for the remote amplifier turn on wire.  This wire, along with a set of RCA cables, is run to your aftermarket amplifier.  All that’s left for you to do is connect the main power wire from your battery and ground. (Not included)
What you will receive
One (1) plug and play wire harness
One (1) Add-A-Circuit fuse tap
One (1) 3 amp fuse
Alternate Options:
Need additional parts for your installation?  Check out our other listings where RCA cables, bass knobs, and amps kits are included!
Compatibility Notes
Audio volume to the amplifier can be adjusted by the dials on the harness.  For easier access we recommend using an external volume knob.(Not included but we can provide one, see other store listings!)
It is up to the installer to select which circuit to use with the Add-A-Circuit.  The radio circuit is most common however any that turns on/off with the ignition could be used if deemed appropriate.
A variety of wire colors may be used for the remote wire coming off the harness.  Regardless of color, rest assured it is for the remote turn on of an amplifier.
Compatible with these models
MAKE
MODEL
From
To
Ford
Edge
2018
2018
Ford
Edge
2015
2017
Ford
Edge (with 4.2-inch screen)
2011
2014
Ford
Escape (with 4.2" screen)
2013
2018
Ford
Explorer (with 4.2-inch screen)
2011
2018
Ford
F-150
2018
2018
Ford
F-150
2015
2017
Ford
F-150  (with 4.2-inch color screen)
2013
2014
Ford
F-250/350/450/550  (base model "XL"
with CD
)  ("XLT")
2018
2018
Ford
F-250/350/450/550  (base model "XL"
with AM/FM only radio
)
2018
2018
Ford
F-250/350/450/550  (base model "XL"
with CD
)  ("XLT")
2017
2017
Ford
F-250/350/450/550  (base model "XL"
with AM/FM only radio
)
2017
2017
Ford
Fiesta  (without MyFord Touch)  (silver dash)
2014
2018
Ford
Fiesta  (without MyFord Touch)  (black dash)
2014
2018
Ford
Fiesta  (with SYNC)  (silver dash)
2011
2013
Ford
Fiesta  (with SYNC)  (black dash)
2011
2013
Ford
Fiesta  (without SYNC)  (silver dash)
2011
2013
Ford
Fiesta  (without SYNC)  (black dash)
2011
2013
Ford
Focus  (with 4.2-inch screen)
2015
2017
Ford
Focus  (without MyFordTouch)
2012
2014
Ford
Fusion
2017
2017
Ford
Fusion
2013
2016
Ford
Mustang  (with 8-inch screen)
2015
2017
Ford
Mustang  (with 4-inch screen)
2015
2017
Ford
Transit  (without NAV )  (with separate 4.2-inch screen)
2015
2016
Ford
Transit  (without NAV)  (without separate 4.2-inch screen)
2015
2018
Ford
Transit
Connect
(with NAV)
2014
2016
Ford
Transit
Connect
(without NAV)  (with cd)  (gray dash)
2014
2016
Ford
Transit
Connect
(without NAV)  (with cd)  (black dash)
2014
2016
Ford
Transit
Connect
(without NAV)  (without cd)
2014
2016
Converter adjustment instructions:
After completing all of the necessary connections, turn the adjustment pots all of the way down by rotating them completely counter-clockwise.
Turn the stereo system on and adjust the main volume control on the stereo to approximately 3/4 maximum volume.
Select one of the adjustment pots and turn it slowly clockwise until you notice audio distortion and then stop.
Turn the remaining pot to the same position as the previously adjusted pot.