-40%
Megasquirt 2 ECU with knock control
$ 147.84
- Description
- Size Guide
Description
Custom megasquirt 2.
For 4 (5,6,8) cylinder engine. Fully operable. VR sensor input (NCV1124)
or hall sensor
. Controlling the level of knocking 1-100% (20-30%
slight knocking, 30-50% medium knock, 50-100% knocking danger of engine damage)
. Built-in coil drivers (2 drivers
). A
ll mosfet drivers. 4
bar MAP sensor (3 bar excess). 2 or 3 wire idle valve.
Additional outputs are connected to the tachometer, cooling fan, water injection, launch, shift lamp, boost control, table switching,
flex fuel sensor input (E85).
I myself made this ECU.
100% workable, tested.
If you need a coils on plug (COP), write to me. I will make outputs for COPs.
If you need for V6 or V8 write to me.
If you are interested in ms3, write.
Included
ECU
,
wiring diagram
,
DB37 connector with wires soldered and numbered, b
luetooth adapter for communication with a laptop.
I guarantee a free repair of the ECU for one year from the date of purchase (you pay shipping, about $ 15).
When buying, write what engine you have and which ignition coils you will use. It is important. If you are not sure which coils to use, I can give you advice.
Good luck!
Testing up to 25,000 rpm
:
https://youtu.be/untSuzvRje8