-40%
Ranger RCI-69VHP AM/FM/SSB/CW 10 Meter Mobile Radio NEW
$ 200.63
- Description
- Size Guide
Description
We are sellingBrand New - Sealed - Never Opened - Complete:
Ranger RCI-69VHP AM/FM/SSB/CW 10 Meter Mobile Radio
The Ranger RCI-69VHP features a clean 60+ watts PEP on all modes – AM, FM, USB and LSB. The RCI-69VHP has all the features a radio operator wants in a top-of-the-line sideband radio including a true frequency counter – not just a frequency display, like the competition. Experience Ranger’s legendary quality and 30 years of sideband engineering expertise with the RCI-69VHP.
General Features:
• Uses Ranger RT1 MOSFET Transistors
• Variable RF Power Control
• 6 Digit Frequency Counter
• New Smoke Chrome Front Panel
• Heavy Duty, High Power Heatsink
• S/RF/SWR Front Panel Meter
• Real Channel Selector Control
• SRA-198 Chrome Noise Cancelling Mic Included
• Variable Talk Back Control
• Built-In Echo with On/Off Switch
• Fine + Coarse Variable SSB Clarifier
• Cool Blue LED Channel & Freq Display
• 4pin Mic Jack with Right Angle Mic Plug
Technical Specifications :
Model RCI-69VHP
Frequency Range : 28.7650 ~ 29.2050 MHz
Modes CW/FM/AM/SSB
Frequency Control Phase-Lock-Loop Synthesizer
Frequency Stability 0.00%
Temperature Range -30OC to +50OC
Input Voltage DC 13.8 V
Antenna Impedance 50 ohms
Size 7 7/8″ (W) x 9 1/4″ (D) x 2 3/8″ (H)
Weight 5 lb.
TRANSMITTER
RF Power Output AM/CW: 20W RMS
FM: 70W
AM/SSB : 60W PEP
Spurious Emissions -50 dB
Audio Distortion 10%
Frequency Response 300 to 2500Hz
Microphone Dynamic
RECEIVER
Sensitivity CW/AM: 0.5 µV for 10dB S+N/N 0.25 µV for 12dB S+N/N
FM: 0.15 µV for 10dB S+N/N
SSB:
Squelch Sensitivity 0.5 µV
Selectivity -55 dB
Image Rejection -50 dB
Hum & Noise 40dB
Audio Power Output 2.5W at 10% THD
Manufacturers of 10-meter radios do not allow returns for any reason and therefore 10 Meter radios are NOT acceptable for return and carry a factory warranty only. Connex, General, President, Galaxy, Ranger, and Stryker radios CANNOT be returned to us. Warranty for 10-meter radios must be handled directly (information can be found in the factory user manual) by the respective manufacturer.